Showing 353–384 of 779 results
-
-
Backing PadsIntermediate Interface Sponge Pad 125mm 5 Hole
Quick ViewR170,00- The interface pad was developed in response to customer demand for a more flexible random orbit (Dual Action).
- The pad is fitted with hook and loop (Hook & Loop) on both sides and fits between the abrasive and the backing pad. The foam is specially formulated to give the required flexibility and tear strength.
- Specially formulated foam to give flexibility and strength
- GRIP (Velcro) fixing for fast change between hook and loop or velour backed polishing pads and abrasives
-
Backing PadsIntermediate Interface Sponge Pad 150mm 6 Hole
Quick ViewR220,00- The interface pad was developed in response to customer demand for a more flexible random orbit (Dual Action).
- The pad is fitted with hook and loop (Hook & Loop) on both sides and fits between the abrasive and the backing pad. The foam is specially formulated to give the required flexibility and tear strength.
- Specially formulated foam to give flexibility and strength
- GRIP (Velcro) fixing for fast change between hook and loop or velour backed polishing pads and abrasives
-
JigSaw BladesJigsaw blade, Dewalt, Flush Cut
Quick ViewR130,00Description:
- Dewalt Flush cutting jigsaw blade - DT2074
- The Dewalt flush cut jigsaw blade has been constructed for fine cutting of straight and curved shapes within varying thicknesses in wood, plywood, chipboard, joiner and fibre boards up to 65mm.
- The HCS jigsaw flexible blades offer high durability and better cutting results in wood and longer tool life.
- The universal T-Shank fitting suitable for use with corded and cordless jigsaws.
-
JigSaw BladesJigsaw Blades – SET – Pack of 5 – Mix
Quick ViewR80,00-
Description
Total is a brand focused on top quality tools at affordable pricing. Our idea is top quality not only referring to the function, usability and appearance, but also the efficiency, performance and maintainability.
5 Pieces/set
2 Pieces JBT111C for wood
2 Pieces JBT118B for metal
1 Piece JBT127D for Aluminum
-
-
-
-
Polishing AccessoriesLambs Wool Bonnet, 2000mm Double Sided with 5/8 Thread
Quick ViewR370,00Description:
DOUBLE SIDED WOOL BUFF 8" 200MM WITH 5/8 THREAD
-
Circular Saw AccessoriesLink Bar – AGP – Guide Rail Connector – (Generic)
Quick ViewR250,00Use the AGP connecting piece to join 2 Festool or Makita plunge saw tracks. -
Circular Saw AccessoriesLink Bar, – FESTOOL, Guide Rail Connectors
Quick ViewR1730,00Description:
Festool Link Bars
Use the Festool connecting pieces to join 2 Festool plunge saw tracks.
-
-
-
-
-
Polishing AccessoriesMOP – 150mm X 2 Section, COLOUR Stitch – Buff
Quick ViewR165,00-
Application:
-
Different metals have varying characteristics. To achieve the best possible result, it is essential that the correct compound and polishing buff is selected for the job.
-
The cutting compound should be used on a Sisal buff or stitched buff. A white stitched buff is ideal for cutting into metals. With the correct compound it will remove stretcher strains, orange peel, polishing wheel grit lines, light die marks etc.
-
An unstitched buff is used with polishing (finishing) compound on metals. Each fold/leaf of material is approximately 1mm thick.
-
Pigtails Available
-
-
Polishing AccessoriesMOP – 150mm X 2 Section, WHITE Stitch – Buff
Quick ViewR200,00-
Application:
-
Different metals have varying characteristics. To achieve the best possible result, it is essential that the correct compound and polishing buff is selected for the job.
-
The cutting compound should be used on a Sisal buff or stitched buff. A white stitched buff is ideal for cutting into metals. With the correct compound it will remove stretcher strains, orange peel, polishing wheel grit lines, light die marks etc.
-
An unstitched buff is used with polishing (finishing) compound on metals. Each fold/leaf of material is approximately 1mm thick.
Pigtails Available
-
-
Polishing AccessoriesMOP – 150mm X 3 Section, COLOUR Stitch – Buff
Quick ViewR280,00-
Application:
-
Different metals have varying characteristics. To achieve the best possible result, it is essential that the correct compound and polishing buff is selected for the job.
-
The cutting compound should be used on a Sisal buff or stitched buff. A white stitched buff is ideal for cutting into metals. With the correct compound it will remove stretcher strains, orange peel, polishing wheel grit lines, light die marks etc.
-
An unstitched buff is used with polishing (finishing) compound on metals. Each fold/leaf of material is approximately 1mm thick.
-
Pigtails Available
-
-
Polishing AccessoriesMOP – 150mm X 3 Section, WHITE Stitch – Buff
Quick ViewR350,00-
Application:
-
Different metals have varying characteristics. To achieve the best possible result, it is essential that the correct compound and polishing buff is selected for the job.
-
The cutting compound should be used on a Sisal buff or stitched buff. A white stitched buff is ideal for cutting into metals. With the correct compound it will remove stretcher strains, orange peel, polishing wheel grit lines, light die marks etc.
-
An unstitched buff is used with polishing (finishing) compound on metals. Each fold/leaf of material is approximately 1mm thick.
-
Pigtails Available
-
-
MorticeingMortice Bit, 1/2 – 12.7mm
Quick ViewR490,00-
Description
-
Most mortisers are equipped to handle 1/4", 3/8", 1/2" and 5/8" square chisels.
Converted to metric: 6,35mm, 9,5mm, 12,7mm and 15,9mm. -
Some are even capable of handling a 3/4" chisel, but keep in mind that this is a pretty healthy chunk to cut at one time and may require a lot of physical exertion. Remember that even if you're cutting a mortise that is 3/4" wide, you don't need to cut the entire width in one pass. A few cuts down one side of the mortise and then back up the other with a 1/2" chisel will be just as effective and not nearly as taxing on you as the operator.
-
Advantages:
-
Faster than a chisel by hand
-
Consistent in size
-
Strong joints
-
Reliable joints
-
Looks good
-
Large glue surfaces enhancing the strength
-
Convenient
-
-
MorticeingMortice Bit, 1/4 – 6.35mm
Quick ViewR490,00-
Description
-
Most mortisers are equipped to handle 1/4", 3/8", 1/2" and 5/8" square chisels.
Converted to metric: 6,35mm, 9,5mm, 12,7mm and 15,9mm. -
Some are even capable of handling a 3/4" chisel, but keep in mind that this is a pretty healthy chunk to cut at one time and may require a lot of physical exertion. Remember that even if you're cutting a mortise that is 3/4" wide, you don't need to cut the entire width in one pass. A few cuts down one side of the mortise and then back up the other with a 1/2" chisel will be just as effective and not nearly as taxing on you as the operator.
-
Advantages:
-
Faster than a chisel by hand
-
Consistent in size
-
Strong joints
-
Reliable joints
-
Looks good
-
Large glue surfaces enhancing the strength
-
Convenient
-
-
MorticeingMortice Bit, 3/8 – 9.5mm
Quick ViewR490,00-
Description
-
Most mortisers are equipped to handle 1/4", 3/8", 1/2" and 5/8" square chisels.
Converted to metric: 6,35mm, 9,5mm, 12,7mm and 15,9mm. -
Some are even capable of handling a 3/4" chisel, but keep in mind that this is a pretty healthy chunk to cut at one time and may require a lot of physical exertion. Remember that even if you're cutting a mortise that is 3/4" wide, you don't need to cut the entire width in one pass. A few cuts down one side of the mortise and then back up the other with a 1/2" chisel will be just as effective and not nearly as taxing on you as the operator.
-
Advantages:
-
Faster than a chisel by hand
-
Consistent in size
-
Strong joints
-
Reliable joints
-
Looks good
-
Large glue surfaces enhancing the strength
-
Convenient
-
-
MorticeingMortice Bit, 5/16 – 7.9mm
Quick ViewR490,00-
Description
-
Most mortisers are equipped to handle 1/4", 3/8", 1/2" and 5/8" square chisels.
Converted to metric: 6,35mm, 9,5mm, 12,7mm and 15,9mm. -
Some are even capable of handling a 3/4" chisel, but keep in mind that this is a pretty healthy chunk to cut at one time and may require a lot of physical exertion. Remember that even if you're cutting a mortise that is 3/4" wide, you don't need to cut the entire width in one pass. A few cuts down one side of the mortise and then back up the other with a 1/2" chisel will be just as effective and not nearly as taxing on you as the operator.
-
Advantages:
-
Faster than a chisel by hand
-
Consistent in size
-
Strong joints
-
Reliable joints
-
Looks good
-
Large glue surfaces enhancing the strength
-
Convenient
-
-
MorticeingMortice Bit, 5/8 – 15.9mm
Quick ViewR490,00-
Description
-
Most mortisers are equipped to handle 1/4", 3/8", 1/2" and 5/8" square chisels.
Converted to metric: 6,35mm, 9,5mm, 12,7mm and 15,9mm. -
Some are even capable of handling a 3/4" chisel, but keep in mind that this is a pretty healthy chunk to cut at one time and may require a lot of physical exertion. Remember that even if you're cutting a mortise that is 3/4" wide, you don't need to cut the entire width in one pass. A few cuts down one side of the mortise and then back up the other with a 1/2" chisel will be just as effective and not nearly as taxing on you as the operator.
-
Advantages:
-
Faster than a chisel by hand
-
Consistent in size
-
Strong joints
-
Reliable joints
-
Looks good
-
Large glue surfaces enhancing the strength
-
Convenient
-
-
MorticeingMortice Square Chisel Attachment For Drill Press
Quick ViewR1800,00- The hollow mortise chisel mortising attachment converts your drill press into a mortising machine. If your woodworking project calls for a number of mortise and tenon joints, you need to invest in a dedicated, hollow-chisel mortiser, with which you could crank out a number of clean mortises in a hurry.
- If you don't have space (or the budget) for another power tool, but have a drill press, there is another option. Almost all floor-standing drill presses can accommodate a hollow-chisel mortising attachment. This attachment will connect to your drill press in just a few minutes, and allows you to use hollow-chisel mortising bits in sizes from 1/4" to 3/4" in width.
- This mortising attachments also include a stock hold-down, which connects to your drill press table. This hold-down will hold your stock (wood) firm when the square chisel is withdrawn from the stock. Using this attachment makes cutting mortises safer and quicker, so resist the urge to cut your mortises without it.
-
Advantages:
- Faster than a chisel by hand
- Consistent in size
- Strong joints
- Reliable joints
- Looks good
- Large glue surfaces enhancing the strength
- Convenient
-
Angle Grinder AccessoriesMulti – Carver Cutting Head SET+ Multi Shaft + Mini 40
Quick ViewR2960,00Kaindl Multi-Carver Cutter head with exchangeable carbide inserts The Multi-Carver works in horzontal and also in vertical direction.
-
Drill MassonaryMulti Construction Drill Bit 04 X 40mm
Quick ViewR70,00-
Grip shank provides aggressive gripping power
-
Steep flute with ribs optimizes dust removal in any material
-
Sharp, ground cutting edges for fast drilling in hard materials
-
Robust head provides long life in impact applications
-
-
Drill MassonaryMulti Construction Drill Bit 05 X 50mm
Quick ViewR75,00-
Grip shank provides aggressive gripping power
-
Steep flute with ribs optimizes dust removal in any material
-
Sharp, ground cutting edges for fast drilling in hard materials
-
Robust head provides long life in impact applications
-
-
Drill MassonaryMulti Construction Drill Bit 06 X 60mm
Quick ViewR80,00-
Grip shank provides aggressive gripping power
-
Steep flute with ribs optimizes dust removal in any material
-
Sharp, ground cutting edges for fast drilling in hard materials
-
Robust head provides long life in impact applications
-
-
Drill MassonaryMulti Construction Drill Bit 08 X 80mm
Quick ViewR95,00-
Grip shank provides aggressive gripping power
-
Steep flute with ribs optimizes dust removal in any material
-
Sharp, ground cutting edges for fast drilling in hard materials
-
Robust head provides long life in impact applications
-
-
Drill MassonaryMulti Construction Drill Bit 10 X 80mm
Quick ViewR110,00-
Grip shank provides aggressive gripping power
-
Steep flute with ribs optimizes dust removal in any material
-
Sharp, ground cutting edges for fast drilling in hard materials
-
Robust head provides long life in impact applications
-
-
Drill MassonaryMulti Construction Drill Bit 12 X 90mm
Quick ViewR145,00-
Grip shank provides aggressive gripping power
-
Steep flute with ribs optimizes dust removal in any material
-
Sharp, ground cutting edges for fast drilling in hard materials
-
Robust head provides long life in impact applications
-
-
Universal LockMulti, Bi-Metal Segment Saw Blade 80mm
Quick ViewR140,00Multi, Bi-Metal Segment Saw Blade 80mm